International Inkjet Supply
Data Sheet
1 MIL CLEAR DRY ERASE LAMINATE
BACKER
Part Number: DRYERASE
For use with dry eraser type markers. Laminate may be written on repeatedly. Wipes clean with dry
tissue, or dry erase cleaning fluid. Readily laminates to any smooth, sealed surfaces.
Environment
Durability:
Indoor use only
Minimum Application Temperature:
+50° F (Minimum for Substrate)
Service Temperature Range:
-40° F to +180° F
Chemical Resistance:
Resistant to ammonium hydroxide - 10%, antifreeze,
detergent, distilled water, gasoline and motor oil -
SAE 20.
Typical Adhesion Values:
PSCT-1 180 ° F @ 12"/min Peel Test
15 min.
24hrs.
30 oz
40 oz
Shelf Life:
2 years from ship date when stored in proper
conditions
Typical Performance Values
The following information on physical and chemical characteristics is based upon tests believed to be reliable.
The values are intended only as a source of information. They are given without guarantee and do not
constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this
material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)
Construction
Size:
38" x 150'
54" x 150'
Adhesive:
Clear Permanent Acrylic
Film:
1.0 Mil Clear Polypropylene
Liner:
50 lb paper
Gloss Level:
90 (avg.) @ 60°