International Inkjet Supply
WATER-RESISTANT 8 MIL POLYPROPYLENE FILM FOR
WATER-BASED INKJET PRINTERS
Part Number: 8MWPPOLY
60-80° F, 50% Relative Humidity
Ideal Storage Conditions:
70° F, 50% Relative Humidity, store in original
Due to absorptive nature of the coating, avoid
touching the coated surface with bare skin. Always
wear cotton gloves when handling inkjet-coated
materials. Rolls are supplied with the coated surface
Outdoor - up to 3 months without lamination with
1 year from ship date when stored in proper
A pressure sensitivity vinyl laminate is recommended, to give surface protection from dirt and abrasion. Thermal
laminates should not be used. Before lamination, please allow image to dry for 24 hours.
Ink saturation level on this product is 300% and heavy coated paper setting on most RIPs is appropriate.
Pigmented-based inks enhance both water and ultraviolet resistance levels. Dye base inks, while maintaining
excellent vibrancy, show a slightly lower ultraviolet resistance. Over saturation with dye based inks may result in
image degradation. Product can be printed on Encad/Kodak, Hewlett-Packard DesignJet (2xxx/3xxx/5xxx),
ColorSpan Displaymaker & Epson Stylus Pro (7xxx/9xxx), Mikami JV4 and Roland Hi-Fi Jet.
Ink Dry Time
Varies with different solvent inks, relative humidity and temperature.
36" x 100'
42" x 100'
50" x 100'
60" x 100'
White Polypropylene Film
Short term outdoor banner 6-8 months when using UV inks. Works excellent in retractable rollup displays